Toyota A760E, A760F Deep Pan

Retail Price: $425.00
Price: $390.00
  • SKU11112-2
- +

For 2010 to 2019 Tundra 4.6 V8 engine trucks, 2010 to 2023 GX 460, and some Sequoia with the 6 speed Toyota A760E or A760F transmission.

Volume: 1 to 1 1/2 quarts over stock

Dimensions: Click here for dimensions. Click for dimensions

Number of Bolts: 20

Benefits:

  • Extra capacity
  • Heavy duty construction
  • Drain hole and magnetic drain plug included
  • Fins for cooling fluid
  • Thick gasket flange for a secure seal to the transmission housing

The PML pan works on both the A760E and the A760F. The stock transmission pan and filter are the same for both. The A760E is used on 2WD applications and the A760F is used on 4WD applications.

These vehicles may be able to use this PML pan as they usually have the Toyota A760E, A760F 6 speed transmission:

  • 2010 to 2019 Tundra 4.6 V8
  • 2010 to 2023 Lexus GX 460 4.6 V8
  • 2010 to 2012 Sequoia 4.6 V8
  • Some international vehicles may also be able to use this pan

Configurations vary! Always check your vehicle to verify transmission and space available for a larger pan. PML cannot guarantee fitment and there is a restocking fee on returns.

Inside of PML Transmission Pan

PML A760 transmission pan, inside  Click on image to view larger.

The level check hole is on the right/passenger side, which is the bottom of the picture. The drain is on the left/driver side.

Drain, Fill/Level Check, and Optional Machining For Temperature Sending Unit

Drain on PML A760 transmission pan   Level check/fill hole on PML A760 transmission pan   location for temperature sending unit on PML A760 pan
Click on image to view larger.

Drain: On left/driver side of pan at the bottom for complete draining.

Level Check/Fill: On the passenger/right side. On the PML pan, the level check hole is at the same location relative to the transmission as on the stock pan. There should be a fill hole on the main casing, no dip stick or fill tube, but the level check hole can also be used to fill.

1/8 NPT Option: Optionally PML can drill and tap a 1/8 NPT hole for a temperature sending unit. This would be for an aftermarket temperature gage. There is a custom machining charge. There is a boss (thick area) on the passenger side of the pan for this. Select the option before adding pan to cart. A plug for the hole is included. The standard size is 1/8 NPT. Check your aftermarket gage to verify the thread specifications for the sending unit before ordering. Call or email if you need a different size.

Included with PML Transmission Pan

PML A760 deep transmission pan, cast finish, package   PML A760 deep transmission pan, black powder coat finish, package  Click on image to view larger.

PML includes new mounting bolts, a plug for the fill/level check hole, and a magnetic drain plug with the pan.

Filter and Gasket

The PML A760 transmission pan works with the stock gasket and filter (not included).

PML Transmission Pan Compared to Stock Pan

Height of PML A760 transmission pan compared to stock pan   Inside of PML A760 transmission pan compared to stock pan
Comparing depth of stock pan and PML pan and insides of both pans. Click on image to view larger.

Write a Review