Ford Sterling 10" Ring Gear, 12 Bolt, Straight Fin Cover

Retail Price: $338.00
Price: $260.00 ea
  • SKU7086
- +

This PML rear cover fits the Sterling 10.25 or 10.5 inch ring gear differential. It can replace the stock 12 bolt cover. Some possible applications are:

  • Ford F-250, 1989 to 2016, some 2017 and newer models
  • Ford F-350 single rear wheel, 1989 to 2016, some 2017 and newer models (if you have a Dually, see PML Dana 80 differential covers)
  • Ford Excursion, 2000 to 2005

Always check your vehicle to verify differential and space available for a larger cover. Because configurations vary, PML cannot guarantee fitment.

Needing more clearance: PML makes a pattern fin Ford 10.25, 10.5 differential cover for those wanting a custom look or have a clearance concern.

Number of Bolts: 12 bolts

Volume: 0.8 quarts over stock, approximately

Dimensions: Click here for dimensions. A separate window or tab will open.

This PML cover for Super Duty Ford trucks and SUVs with the Sterling 10.25 or 10.5 inch ring gear features a traditional straight fin design and round shape.

Benefits:

  • Extra capacity
  • Heavy duty sand cast aluminum construction for thick walls to add strength
  • Machined gasket flange to provide a uniform clamping force for a secure seal
  • Drain hole and magnetic drain plug included
  • Similar shape to stock cover
  • Fins for heat dissipation

Front Cover for 4WD Vehicles

PML makes front end covers for these trucks. The corresponding front differential is a Dana 50, 60 and the stock cover has 10 bolts.

PML makes a cover for pre 1999 trucks with the larger ring gear and one for the 1999 and later trucks with steering linkage close to the stock cover.

Inside of PML Cover

The inside of the PML cover is smooth and round. It is shaped similar to the stock cover.

Inside of PML Ford 10.5 differential cover  Click on image to view larger.

Included with Cover

This PML differential cover ships with new mounting bolts, plug for fill hole, and a magnetic drain plug. Here is an example:

Included with PML Ford 10.5 differential cover  Click on image to view larger.

This shows the contents of the box for this PML cover in the cast finish. The other finishes would be the same except that the cover would be in a different finish.

Drain and Optional Machining for Temperature Sending Unit

Drain is on the bottom and a magnetic drain plug is included. The level check is on the differential housing.

Drain on PML Ford 10.5 differential cover  Click on image to view larger.

This cover can be machined for a temperature sending unit. The boss on the right side can be drilled and tapped. This is an option and there is a machining charge. The standard size is 1/8 NPT.

PML Differential Cover Compared to Stock

PML Differential Cover Part Number 7086 compared to stock   PML Differential Cover Part Number 7086, compared to stock, top view
Click on image to view larger in a new tab or window.