Front 12 bolt differential cover for 2011 and newer GMC/Chevrolet 2500HD, 3500HD trucks.
Magnetic drain plug and new mounting hardware included.
Volume: 1/2 quart over stock
Dimensions: Click here for dimensions. 
Just 5/8 inch deeper than stock at the top of the finned area at the bottom of the cover
Number of Bolts: 14 holes, 12 large holes for bolts, 2 small holes for brackets/clips for cables
This PML front GM diff cover replaces AC Delco Part Numbers 84756922 and 20768577.
The shape of the PML cover is similar to the OEM cover to avoid clearance issues. Cooling fins on the bottom help with dissipating heat from the fluid. Drain on the bottom for easy fluid changes and a magnetic drain plug is included. Fill/level check is at the same location as the stock cover fill/level check.
Benefits:
- Includes mounting holes for factory wire harness installation
- Curved shape similar to stock cover
- Maintains clearance for better fitment
- Drain and magnetic drain plug included
- Heavy duty, sand cast aluminum
- Finned for heat dissipation
- Extra capacity
- Made in USA
Ring gear is 9.25 or 9.5.
PML designed this cover for the front differential on 2011 and newer GM heavy duty trucks such as:
- 2011 to 2025 Chevrolet Silverado 2500 HD
- 2011 to 2025 Chevrolet Silverado 3500 HD
- 2011 to 2025 GMC Sierra 2500 HD
- 2011 to 2025 GMC Sierra 3500 HD
Vehicle configurations vary! PML cannot guarantee fitment. Check your vehicle configuration and clearance available for a larger cover.
Volume: 1/2 quart over stock
Dimensions: Click here for dimensions.
, Just 5/8 inch deeper than stock at the top of the finned area at the bottom of the cover
Number of Bolts: 14 holes, 12 large holes for bolts, 2 small holes for brackets/clips for cables
Gasket
This PML cover is compatible with the stock gasket. The current GM/AC Delco part number is 85742563. There are other part numbers but these seem to have been replaced by this one.
Click on image to view larger.
This GM/AC Delco gasket is a reusable gasket. Make sure it is clean and free of any dirt, bits or nicks or else that it where it will leak. Be careful that it does not bind on the bolts. This PML cover will also work well with silicon gaskets like RTV, cork composite gaskets or paper fibre gaskets.
Included with PML Differential Cover
With each cover, PML includes new mounting bolts with washers, plug for fill/level check hole, and a magnetic drain plug.
Click on image to view larger.
Inside of PML Differential Cover
This PML cover follows the same general shape as the stock cover with some extra capacity at the bottom. Open interior is similar to stock cover.
Click on image to view larger.
Optional 1/8 NPT Machining
Optionally, this cover can be drilled and tapped with a 1/8 NPT hole for an aftermarket temperature sending unit. There is an extra charge for PML to machine this and a plug would be included. The location is on the driver side of the cover below the fill/level check hole. The first image shows the driver side of the cover without the machining. The second image shows the driver side of the cover with the 1/8 NPT hole machined.
Click on image to view larger.
Stock Covers
This PML front GM diff cover replaces AC Delco Part Numbers 84756922 and 20768577.
Pictures of stock cover, outside and inside:
Click on image to view larger.
Pictures of the stock cover on 2015 Silverado 2500HD diesel double cab and the stock cover on a 2022 Silverado 2500 gas engine truck:
Click on image to view larger.
Front Shield
On some models, there is a splash shield protecting the steering in the front. Shield does not interfer with the differential cover and is not designed to protect differential cover.
Picture of shield on 2022 Silverado 2500HD, not a Z71:
Click on image to view larger.
PML Differential Cover Compared to Stock

Outside and inside of covers:

Click on image to view larger in a new tab or window.

