| Racer Net: ||$6.97/FT|
| Our Price: ||$3.69|
| You Save: ||$3.28/FT|| (47%)|
As Strong As Stainless But Much Lighter
FPS Push-Lite Series Race Hose is manufactured to the same rigorous standards as our 3000 Series Stainless Race Hose.
It is the perfect alternative when cost or weight is the main consideration.
FPS Push-Lite hose has these great features:250 PSI, maximum working pressure allows for most automotive water, oil, and fuel system. Inner layer of synthetic PKR covered with a fiber braid reinforcement and wrapped with a weather-resistant textile cover. Temperature range to 300F. Hose assemblies with Push-Lite Hose are over half the weight of the same stainless hose assembly. For high heat or higher-pressure applications, we recommend our light-weight stainless band clamps.
8000 Series Push-Lite may be used in any number of automotive applications. If you are using fittings other than our 8000 Series Push-Lite Hose Ends, be sure to measure the hose barb diameter to determine the suitability.
This hose is sized fractionally, but the suitability is at the sole determination of the end user.
Tech Tip: To ease the installation of any push on hose end, first dip the end of the hose in boiling water to soften it slightly (a heat gun also works well). Clamp the hose in a vise and oil the barbs with common motor oil. Push the hose over the barbs with one smooth movement.
Please select hose size and length below