| Racer Net: ||$230.00/Each|
| Our Price: ||$215.95|
| You Save: ||$14.05/Each|| (6%)|
PML's stock capacity transmission pan for Ford C6 transmissions maintains ground clearance for full size 1960's and 1970's cars.
PML also makes an extra capacity Ford C6 transmission pan for Ford trucks and SUVs with the C6.
The deep pan provides provides extra fluid for F250 and F350 trucks which have more room for a larger pan.
A lower profile pan can accommodate more applications and provide the strength and cooling benefits of an cast aluminum transmission pan.
The Ford C6 transmission is found on many full size Ford, Lincoln and Mercury cars, for example:66 69 Comet
67 78 Cougar
64 70 Fairlane
66 74 Galaxie
66 79 Lincolns
66 80 LTD
77 79 LTD II
66 72 Meteor
68 76 Montego
68 74 Monterey
66 79 Ranchero
66 79 Thunderbird
68 76 Torino
These classic Fords had options for several different transmissions. The C4, Cruise-o-Matic, and manual transmissions were also common.
Please verify your transmission and look for any interference with a larger aftermarket pan before ordering.
The image at below shows three stock Ford C6 tranny pans with the PML deep and stock capacity pans. (Click on image to view larger picture.)
PML designed this pan to work with stock gaskets and filters.
Filter supports are not needed as the filter bolts on to the valve body.
The fluid level is at the same place with a PML pan or a stock pan so an extension is not needed.
PML Transmission Pan Features
Sand-cast aluminum with raised fins
3/16-inch thick wall construction to add strength to the transmission case
3/8-inch thick gasket flange will not bend when bolts are tightened
Machined gasket surface for a secure seal
Boss cast into pan can be machined for a temperature sensor
Magnetic drain plug for easier, less messy maintenance
Mounting hardware provided
Volume: stock to 1 quart over stock depending on application
Dimensions: Click here for dimensions.