| Racer Net: ||$195.00/Each|
| Our Price: ||$190.95|
| You Save: ||$4.05/Each|| (2%)|
Silverado or Sierra 2500HD 8.1 or diesel, 3500 or 3500HD with this AAM 11.5 rear: please see part number 9511. The 9511 has a different fin style and one quart over stock increased capacity. If you choose to use this cover, part number 10361, you have to bend the brake bracket located at 12 o'clock.
Ram 2500 with the AAM 10.5 inch ring gear axle: The American Axle 10.5 stock cover is flat at the bottom while the 11.5 comes to a point. The 10.5 inch is usually found on 2500 trucks with the V10 engine, standard output diesel engine, or the 5.7 Hemi in 2500 trucks without the Mega Cab. See our AAM 10.5-inch cover. You might have an identification sticker in your glove box or on your driver's door that states which differential you have.
Always check your truck to verify your differential and clearance.
Drain, Oil Fill, and Level Check
This differential cover has oil fill, level check, and drain holes to make it easy to follow the 15K oil change interval that Dodge specifies for the AAM axles used in 2003 and newer Ram 2500 & 3500 trucks.
Optional Machining for Temperature Sending Unit
This cover also has an undrilled boss for a temperature sensor.
Differential Cover on 2014 and 2015 Trucks With Sway and Pan Hard Bars
2014 and 2015 Ram 2500HD and 3500HD trucks have pan hard and sway bars behind the rear differential cover. For the standard suspension, it looks like there should be enough room for a PML cover. We are waiting to hear back from customers who are testing the clearance. We have heard the air ride suspension has much less clearance. We have had this covers successfully installed on a 2014 Ram 2500 with a Helwig sway bar.
The PML cover is about 4 inches deep. This is 1 inch deeper than stock from a 2003 truck.
PML Differential Cover Features:
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to differential housing
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal using RTV or factory reusable gasket
- Oil changes without removing the cover
- All hardware provided, including magnetic drain plug
Volume: 0.75 quarts over stock
Dimensions: Click here for dimensions. The PML cover is 1 inch deeper than the 2003 stock cover.
Please select Finish below