The ATD5491 tests all 6V and 12V all lead acid batteries individually
or in parallel and series battery packs.
The tester will display the battery or battery pack condition as %
available capacity, rated capacity (i.e. CCA’s), state of charge voltage
and good, marginal or replace status.
The ATD5491 also tests 12V, 24V and 36V starter and charging
systems including starter draw, alternator output (loaded/unloaded),
and diode ripple.
The ATD5491 features an IR wireless printer output for remote printout of the test results. The test data for the last test performed is stored in the memory and can be reviewed either when connected to a battery, or when disconnected from the battery at a later time.