| Racer Net: ||$678.00/Each|
| Our Price: ||$436.95|
| You Save: ||$241.05/Each|| (36%)|
Compatible with 8 cylinder marine engines
with distributor type ignition.
135 mJ spark energy output.
Digitally set RPM limit with 100 RPM steps
from 3,000 to 9,900 RPM.
Seven switch selectable advance curves and a fixed timing
mode cover most Mercury marine high performance
PC programmable idle stabilization feature.
PC programmable advance features ranging from a simple
RPM based advance curve to a 3D timing map with boost
Dedicated input terminals for manifold pressure and an
externally activated 0-18 retard feature.
Built-in data logging capability with 16 Mbit Data FLASH
Three general purpose input/output terminals. Two inputs are
reserved for data logging. An additional input/output terminal
can be used for data logging or as an RPM window switch.
Fully encapsulated construction. 12 pin Deutsch connector
used for signal connections.
Module and coil are both certified to meet the ignition
protection requirements of the NMMA, the USCG, ISO 8846,
and SAE J1171 standards for marine applications.
Compact size: Module is 7.0"L x 5.25"W x 1.9"H.
Highly efficient switching power supply based on US Patents
6518733 and 6636021. Less than 5 amp current draw at 8,000
Indexed Mercury Marine Rotor (P/N: 103004)that is required
when using Mercury Marine Hall effect distributor, Available below