| Racer Net: ||$165.00/Each|
| Our Price: ||$160.95|
| You Save: ||$4.05/Each|| (2%)|
This Ford differential cover is designed for non-IRS, REAR differential on Ford vehicles. Some 4WD F150 trucks have the 8.8 ring gear differential in the front but on the trucks we have seen there is not enough room for this cover. For vehicles with IRS, the linkage bolts on to the cover and PML differential covers are not compatible.
Note to Expedition owners: a larger cover may be too deep to clear the track bar that runs behind the differential cover. Using the dimensions, please check your vehicle for clearance before purchasing.
Some models may have the smaller Ford 7.5 differential, which is more rounder in shape and shorter (vertically). Other models have have the larger For 9.75 differential, which has a different shape and has 12 bolts. The Ford 8.8 stock cover is about 11 inches vertically and the 7.5 inch is about 9.75 inches vertically.
PML Differential Cover Features:
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to differential housing
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal using RTV or factory reusable gasket
- Oil changes without removing the cover
- All hardware provided, including magnetic drain plug
Volume: 0.6 qt. over stock
Dimensions: Click here for dimensions.