| Racer Net: ||$200.00/Each|
| Our Price: ||$192.95|
| You Save: ||$7.05/Each|| (4%)|
Volume: 0.5 quarts over stock, approximately. On Ford F–350 trucks, this front end differential cover is slightly deeper than the stock covers for added fluid capacity.
Dimensions:Click here for dimensions. the A separate window will open and load an image. On the inside, the distance from the gasket flange to the inside is approximately 3.1 inches at the tallest point. Check for clearance with wheels straight, left and right. Check that the fill/level check is in the same location as on your stock cover.
Steering Linkage Clearance Concerns: For trucks about 1999 and newer, the steering linkage can cause a clearance issue with this cover. Trucks that are lifted or modified may not have any clearance issues. If you have a newer model truck with the steering linkage next to the stock front cover, PML designed a cover to clear it. See our patterned fin Dana 50, 60 front cover, part number 10737. Note that if you have an older model trucks (1966 to about 1999), you cannot use this patterned fin cover, part number 10737, because it is too shallow to clear the gear on older trucks.
Vent: If your stock cover has a vent fitting (instead of having a vent on the differential housing), this differential cover cannot be used. The vent is common on Dodge trucks.
Variations: Configurations vary so please check carefully. Some F250 trucks have independent front suspension and cannot use this cover. Some Dodge Ram 2500 and 3500 trucks can have a track bar and do not have clearance for a larger cover. Be sure to check for clearance with the steering all the way at stops.
Drain and Fill/Level Check: This differential cover has drain and fill/level check holes.
PML Differential Cover Features:
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to differential housing
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal using RTV or factory reusable gasket
- Oil changes without removing the cover
- All hardware provided, including magnetic drain plug