| Racer Net: ||$165.00/Each|
| Our Price: ||$150.95|
| You Save: ||$14.05/Each|| (9%)|
This Dana 44 differential cover features fill/level check hole, a drain hole, fins and aluminum construction for to dissipate heat.
The fins have the traditional straight fin design and the shape of the cover has the same shape as the stock cover.
These aftermarket covers have thick walls and gasket flanges to add strength to the differential housing and to provide a uniform clamping force on the gasket surface for a secure seal.
PML offers several Dana 44 differential covers so you can choose the cover the best suits your vehicle.
This cover has a level check/fill hole well below the middle.
This is lower than our Top Fill, part number 9516, or our High Front Fill, part number 6057.
You do not want to overfill or underfill the differential.
PML also makes a cover for the 12 bolt Dana 44/226.
Select the PML cover with the fill/level check location the same as your stock cover.
Because the Dana 44 differential has so many uses and variations, read this pdf file on PML Covers for Dana 44 differentials for more information on what to check before replacing your stock cover.
The Dana 44 differential is found on many vehicles beginning in the 1940s and is still used today. Dodge Ramcharger front, 1972 to 1978
Dodge Pick Up front, 1972 to 1978
Ford F100 and F150 front, 1971 to 1979
Ford F250 front, 1966 to 1979
Ford F350 front, 1966 to 1979
Ford Bronco front, 1971 to 1979
Jaguar (some rear)
Jeep CJ rear, 1941 to 1975
Jeep Truck front, 1974 to 1986
Jeep Wagoneer front, 1974 to 1986
Jeep Cherokee front, 1974 to 1986
Jeep rear, 1974 to approximately 2008
IH Scout front, 1975 to 1980
IH Scout rear, 1967 to 1980
This PML cover for the Dana 44 differential typically coresponds to stock covers on 1941 to 1980 vehicles.
Here are some possiblities:
Do not use this cover on: 2009 and newer Jeeps or GM front ends.
In 2009, Jeep changed the design of the rear axles and added a vent so a PML cover will not work on newer models.
Comparing Dana 44 Covers
Be sure to compare the number of bolts, shape, level check hole location to your stock cover and check if you have clearance for a larger cover.
Graphic on the left compares Part Number 5055 and 6057 fill levels.
Graphic on the right compares the capacity and fill levels of PML's Part Number 9516 top fill and PML's Part Number 5055 low front fill cover and the stock cover 42960-1 (used on Jeeps).
PML Differential Cover Compared to Stock
These images show this PML differential cover compared to the stock cover.
This image compares the depth of all three PML Dana 44 differential covers and the stock cover.
Click on image to view larger in a new tab or window.
For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)
PML Differential Cover Features:
Sand-cast aluminum with raised fins for cooler temperatures
Thick wall construction to add strength to differential housing
Thick gasket flange will not bend when bolts are tightened
Machined gasket surface for a secure seal using RTV or factory reusable gasket
Oil changes without removing the cover
All hardware provided, including magnetic drain plug
Volume: stock capacity to qts. over stock
Dimensions: Click here for dimensions. Check size, shape, number of bolts, level check hole location, axle rotation, vent if any, and clearance.
Polished Finish is special order and can delay order 2 weeks