| Racer Net: ||$260.00/Each|
| Our Price: ||$234.95|
| You Save: ||$25.05/Each|| (10%)|
This pan can be used on 1997 and newer vehicles if there is enough clearance between frame cross member and stock pan.
Most 1997 and newer vehicles do not have enough clearance and need the late model pan.
Part number 9437 provides clearance for the exhaust but will not clear the transmission internals on the early models.
This pan can fit on 1993 to 1996 H1 Hummers, but the frame cross member is very close and you will need to check the drain plug location.
On a previous revision of this pan, the drain plug was on the bottom, which required a hole to be cut in the frame cross member to allow the pan to drain.
The drain plug is now on the side and may be easier to access.
If you have a Hummer, please visit PML's Hummer page for more info.
Drain Hole and Location for Temperature Sending Unit
Click on image to view larger.
Image shows the rear and driver's side of the pan.
The drain hole is on the driver's side of the pan. All pans include a magnetic drain plug along with the mounting bolts.
On the passenger's side, the pan has a boss that can be machined for a temperature sensor.
Jaguar XJS models with the 4L80 transmission have a stock pan specific to the Jaguar.
PML does not make a replacement pan for the Jaguar XJS 4L80 stock pan.
PML Transmission Pan Features
Increased oil capacity for cooler temperatures
Sand-cast aluminum with raised fins
3/16-inch thick wall construction to add strength to the transmission case
3/8-inch thick gasket flange will not bend when bolts are tightened
Machined gasket surface for a secure seal
Boss cast into pan can be machined for a temperature sensor
Magnetic drain plug for easier, less messy maintenance
Mounting hardware provided
Gasket and filter not included (use stock parts).