2005 and Newer Ford Mustang, including V6, 3V GT, and Shelby GT500
This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) driver's side fuel rail, sandwiched between the rail and the OEM fuel pressure sensor.
The fuel block seals with OEM-style O-rings, so no gaskets or sealants are required.
The installation is a quick and simple affair.
The block has one 1/8" NPT port on each side, providing a convenient tap for a fuel pressure gauge, a tap for a nitrous system, or both.
A stainless steel pipe plug is included to plug one port if the port is unused.
This product is an original Metco Motorsports design that has been copied a number of times, but none of the copies match the quality and precision fit of the original.
The kit includes the black-anodized, CNC-machined fuel block, the O-ring, one stainless steel 1/8" pipe plug, and mounting hardware.
Will not fit the 2011 & newer 5.0 application.
Note 1: This adapter is available with a 1.5" carbon fiber-faced pressure gauge under Metco Motorsports PN MFF0007.
Note 2: To confirm fitment on vehicles other than those listed, measure the distance between the two mounting bolts for your fuel pressure sensor.
If your measurement is 1.6", this adapter will fit your fuel rail.
If your measurement is 2.0", please see the MFF0003 adapter listed under the Fuel System Components tab.
This adapter is approximately 3/4" thick, so the user should confirm that the necessary clearance exists above the pressure sensor before ordering.